Gepair stainless wire rope teach you how to use wire rope better.Want to use the same wire rope for a long time, to ensure the quality of wire rope, to eliminate safety hazards;Secondly, it is necessary to pay attention to the all-round maintenance of the wire rope in daily use.
Safety inspection is mainly to check the wire rope in all aspects before use, so as to ensure the lifting weight of the wire rope in the safe range.The main method is to pull the extent of all aspects of the wire rope, such as wear, deformation, bending and so on.
After finishing the pre-use safety inspection, it is necessary to pay attention to the protection and maintenance during the use.Maintenance is mainly divided into the following parts:
1, in order to long service life of wire rope, it is necessary to use wire rope in a certain way.The following three methods are especially forbidden: dragging and throwing at will;Sudden change of lifting speed;Frequent impact loads.
2, dirt and rust is the Nemesis of wire rope, be sure to use a wire brush to brush the dirt on the wire rope carefully, and grease all parts of the wire rope to prevent rust.
3. The oil coating cycle of the wire rope is once every 4 months. The temperature of the oil used must be about 50℃.
4. When placing the wire rope, the plate should be folded, not overlapped, and not placed in dirty and wet places.
5. In order to avoid loose and loose rope head, the top of the wire rope needs to be tightened or welded firmly.
6, in the process of use, if there is oil drops on the surface of the wire rope, it means that the wire rope has exceeded the load, should immediately stop using, and then the wire rope for all aspects of inspection, when necessary, the use of new wire rope.
Post time: Mar-15-2022
